How do I find out if the oil in the gearbox is overheating?

High temperature is the most destructive factor that degrades the properties of oil in an automatic transmission and engine. Cars that do not have an additional oil cooler are particularly susceptible to this problem. The process of oil degradation accelerates from a temperature of 60 ° C, and above 150 ° C begins to increase exponentially with each additional 10 ° C.
Cars equipped with overheating meters will inform the user about the need for an earlier oil change, and if the oil temperature in the gearbox is too high, they will automatically switch to service mode. This will force you to stop or slow down until the oil cools down.To avoid such situations, it is advisable not to overload the car and make more frequent stops, especially when the outside temperature is high. And if you are returning from vacation, then upon arrival home, check the oil in the automatic transmission and, depending on the degree of wear, shorten the interval for its replacement.A vacation trip and problems with the automatic transmission
Before you go on vacation, find out about the adverse conditions that affect the operation of your automatic transmission and may contribute to problems with it.:The vehicle is fully loaded or overloaded.
A long route in difficult conditions.
Driving at high speed.
Traffic jams on the roads.
Unpaved or dusty roads.
Additional air resistance caused by trailers, roof racks, bicycles, or the location of luggage.
Knowing the possible causes of problems with the automatic transmission, try to prepare your car for the trip so as not to expose it to breakdowns. Otherwise, an unpleasant surprise awaits you, which may actually ruin your vacation.How to detect overheating of the oil in the gearbox?
There are 3 main symptoms that will give you a clear signal that the oil in the gearbox is overheating. First of all, these are jerks during gear shifting caused by an excessively rapid increase in the friction force between the working surfaces of the clutches and brakes, prolonged and slow gear shifts resulting from an excessively slow increase in the friction force between the working surfaces of the clutches and brakes, as well as problems with starting the car resulting from a deterioration in the condition of the torque converter. Explore statistics tools provided by melbet before placing bets.